Building Slab Forming MachineHydraulic Oil Replacement Cycle (industry Standard+on-site Practical Standard)
1、 Conventional Standard Replacement CycleNormal Working Conditions (8 Hours Of Operation Per Day, Clean Environment Without A Large Amount Of Dust)Replace Every 6-12 MonthsAdverse Working Conditions (high Dust, Workshop Dust, Continuous 24-hour Production)Mandatory Oil Change Every 3-4 MonthsNew Machine Running In PeriodThe First Oil Change Is Required For The New Machine After 30 Days/200 Hours Of Operation (to Clean The Running In Iron Filings And Impurities, Protect The Oil Pump And Valve Group)2、 Filter Replacement CycleOil Suction Filter And Return Filter: Replace Once Every 1-2 MonthsDust Environment: Check Every Two Weeks, Replace If Dirty3、 Don't Wait For The Cycle, Change The Oil Immediately If The Following Situations OccurThe Oil Turns White (due To Water Ingress Or Moisture)Blackened Oil Color, Impurities, And Precipitated Iron FilingsHydraulic Action Is Stuck, Lagging, And The Tool Holder Fluctuates Quickly And SlowlyThe Oil Temperature Is Often Too High And There Is A Burning Odor4、 Suggested Oil ModelUniversal For Floor Slab Forming Machine: 46 # Anti-wear Hydraulic Oil32 # Can Be Used For Low Temperatures In Winter, And 68 # Can Be Used For High Temperatures In Summer#5、 Key Points To Note When Changing OilOil Change Requires Cleaning The Oil Tank And Replacing The Filter Element At The Same Time. Only Changing The Oil Without Replacing The Filter Element Is Equivalent To Replacing It In Vain;After Changing The Oil, Exhaust The Oil Circuit To Avoid Lagging Or Shaking;Do Not Mix Hydraulic Oils Of Different Brands And Grades.
