Light Steel Keel MachineThe Following Are The Reasons For The Common Problems That Occur During Use:
Inaccurate Molding Dimensions And Non-standard Angles
The Width, Height, And Angle Of The Keel Are Unstable, And The Finished Product Cannot Fit Into The Accessories And Is Not Installed Tightly.
Common Reasons: Roller Wear, Incorrect Clearance, Uneven Thickness Of Raw Materials, And Feed Deviation.
Twisted Keel, Side Bending, Wavy Edges
The Keel Coming Out Is Not Straight, Either Twisted Into Fried Dough Twists, Or Bulging And Wavy On The Side.
Common Reasons: Asynchronous Rolling Of Each Pass, Uneven Force Distribution, Uneven Leveling Of Guide Wheels, And Excessive Stress On The Sheet Metal.
Punching Gap/punching Misalignment, Cutting Blade Continuously Feeding
The Punching And Punching Gap Positions Are Offset, Causing The Installation Holes To Not Align; Or The Cutting Blade Cannot Cut Continuously And The Edge Of The Incision Is Severe.
Common Reasons: Encoder Error, Loose Mold, Dull Blade, Unstable Oil/air Pressure.
