UseBuilding Slab Forming MachineStandardized Operation, Daily Maintenance, And Safety Protection Are Indispensable, Which Can Ensure The Quality Of Sheet Metal Forming, Extend Equipment Life, And Avoid Safety Accidents.
Before Starting Up, It Is Necessary To Check Whether The Power Supply, Voltage, Air Pressure, And Lubrication System Are Normal, Confirm That The Rollers And Cutters Are Not Loose, There Are No Foreign Objects, And All Protective Devices Are Intact And In Place. It Is Strictly Prohibited To Turn On The Machine With Faults.
The Raw Materials Should Be Flat, Rust Free, And Free Of Oil Stains. The Thickness And Material Should Meet The Equipment Requirements. When Feeding, Ensure That The Board Is Centered And Does Not Deviate, To Prevent Jamming And Scratching Of The Rollers, Which May Affect The Forming Size And Surface Smoothness.
During The Operation, Strictly Follow The Parameter Settings And Do Not Produce At Excessive Speed Or Load. In Case Of Abnormal Noises, Shaking, Deformation Of The Sheet Metal, Inaccurate Pressing, Etc., The Machine Should Be Stopped Immediately For Inspection. It Is Forbidden To Touch The Rolling Mill, Sheet Metal, And Cutting Blade Parts With Hands While The Equipment Is Running.
When Changing Specifications And Debugging, First Cut Off The Power And Hang The Tag, Then Adjust The Gap, Limit, And Cutter Position Of The Rolling Mill. After Debugging Is Completed, Conduct An Empty Machine Test, And Then Inspect The Size Of A Small Amount Of Material. Only After Passing The Inspection Can Mass Production Be Carried Out.
Regularly Add Lubricating Oil To Bearings, Chains, Guide Rails, And Other Parts, Clean The Surface Iron Filings And Debris Of The Equipment In A Timely Manner, And Keep The Machine Clean. Regularly Inspect Bolts, Encoders, Hydraulic/pneumatic Components, And Promptly Address Any Signs Of Wear Or Looseness.
Non Professionals Are Strictly Prohibited From Dismantling Or Modifying Programs Without Authorization. After The Work Is Completed, Cut Off The Power, Clean Up The Site, And Maintain And Record The Equipment. Standardized Use Is Essential For Stable, Efficient, And Long-term Operation Of Equipment.
